The banding mask machine is a kind of efficient plane mask banding welding equipment. It is mainly used for the banding welding of non-woven plane masks. It can weld the banding of various types of plane masks.

Working principle:

Bind face mask machine adopts ultrasonic welding method, on the machine set the conveyer, the conveyer input masks semi-finished products, through the tube package edge, again with ultrasonic flowers round after pressing, cutting the bind, thus the output of finished product, only one mask ontology in the transmission of the machine, the rest of the follow-up work are completed fully automatic.

Features of the lacing mask machine

1. The frame of the banding mask machine is made of aluminum alloy and stainless steel, with light and beautiful appearance and no rust.

2. Automatic counting can effectively control production efficiency and production schedule.

3. Variable frequency control, which can adjust the running speed of the equipment according to the actual needs.

4. Pull the barrel into the material, more accurate positioning, can control the width of the raw material, saving costs.

5. Unified control of finished length and dimension, with deviation of ±1mm, can effectively control the finished length.

6. With a high degree of automation, the lacing mask machine has low requirements for operating staff, so it only needs to release materials and sort out finished products.

7. Stable performance and easy operation.

8. The automatic ultrasonic welding wheel is made of imported steel, which has a long service life and is wear-resistant and durable.

Installation precautions

1. Disassemble the package and check whether there are any signs of damage on the surface and parts of the equipment. Check whether the screws are loose, the electrical joints are locked tight and the accessories are complete.

2. The lacing mask machine should be placed on the flat hard ground. It is required that the mask lacing machine should be at least 0.5 meters away from the heat source, and make sure that there is at least 1 meter before and after the mask lacing machine, and at least 1 meter about the space for operation.

3. Check the voltage requirements of the label on the back of the generator box and make sure the system is well grounded.

4. Connect the equipment with the power supply. Please turn off the power switch first.

The banding mask machine is mainly applicable to the banding welding of 2-layer non-woven surface mask, 3-layer non-woven surface mask, medical surface mask, 4-layer activated carbon surface mask and anti-virus surface mask.